Printed and painted wallpaper on a weaved fabric backing was a common way to decorate homes in Sweden during the eighteenth and nineteenth centuries. Not much is written about the craftsmanship in relation to the hanging of these wallpapers and even less about the conservation of the objects. Even so, many wall segments remain in situ and in museums and are more often than not in dire need of conservation such as deacidification and consolidation. These are Composite objects, consisting of cellulose materials with different properties along with adhesives and paints. Analysis of the materials is required to ensure safe handling and choice of conservation materials, and to establish a treatment plan which will be executed in several steps. This thesis aims to identify these steps and develop a method for conserving the wall segments with suitable materials, preferably without altering the source material to any significant degree.

Cultural objects may become wet by deliberate water cleaning, water disaster or watersoaked for other reasons. Air drying textile objects and even other organic materials from awater wet state, involves many problems depending on the strong capillarity action of water.Damages and changes such as bleeding of dyes, stains or lines of impurities from watermovement, shrinking or stiffness can occur. Freeze-drying as an alternative drying methodhas often been used for wet archaeological and marine objects, but more seldom for historicalmaterials.This bachelor thesis addresses the issue of whether freeze-drying can be an alternative controlleddrying method for historic costumes. Costumes and related objects are often compositeobjects, consisting of multiple materials, as well as being three dimensional, all of whichwill complicate drying. The purpose of this study was to investigate whether it is possible tohandle costume objects after wet cleaning for drying by freeze-drying, and if damages due tosurface tension of water, can be avoided in this way.

Syfte: Syftet med denna studie var att se hur och varför volatiliteten påverkades i DJIA, S&P 500 och NASDAQ Composite under IT-bubblan.Metod: Års- och månadsvolatiliteten för DJIA, S&P 500 och NASDAQ Composite har beräknats under 1995-2004 med hjälp av data från Yahoo Finance.Empiri: Resultatet visar att volatiliteten var väsentligt högre i NASDAQ Composite än vad den var i S&P 500 och DJIA som i sin tur höll en liknande volatilitet i förhållande till varandra.Analys: I analysen framträdde det att volatiliteten blev väsentligt högre i samband med att bubblan sprack under maj 2000 fram till dess att paniken lade sig kort efter maj 2002. Det fanns en hög överensstämmelse mellan denna rapport och övriga tidigare studier. Teorierna var mestadels väl applicerbara.Slutsats: Volatiliteten för DJIA, S&P 500 och NASDAQ Composite var som högst mellan 2000 och 2002 under undersökningsperioden 1995-2004. IT-bubblan uppstod samt sprack till följd av irrationellt investeringsbeteende bland investerarna på aktiemarknaden och paniken som uppstod efteråt gjorde att volatiliteten på aktiemarknaden höll sig förhållandevis hög fram tills den lade sig kort efter maj 2002. NASDAQ Composite hade högst volatilitet till följd av IT-bubblan medan DJIA och S&P 500 hade likvärdig volatilitet.

Syfte: Syftet med denna studie var att se hur och varför volatiliteten påverkades i DJIA, S&P 500 och NASDAQ Composite under IT-bubblan.Metod: Års- och månadsvolatiliteten för DJIA, S&P 500 och NASDAQ Composite har beräknats under 1995-2004 med hjälp av data från Yahoo Finance.Empiri: Resultatet visar att volatiliteten var väsentligt högre i NASDAQ Composite än vad den var i S&P 500 och DJIA som i sin tur höll en liknande volatilitet i förhållande till varandra.Analys: I analysen framträdde det att volatiliteten blev väsentligt högre i samband med att bubblan sprack under maj 2000 fram till dess att paniken lade sig kort efter maj 2002. Det fanns en hög överensstämmelse mellan denna rapport och övriga tidigare studier. Teorierna var mestadels väl applicerbara.Slutsats: Volatiliteten för DJIA, S&P 500 och NASDAQ Composite var som högst mellan 2000 och 2002 under undersökningsperioden 1995-2004. IT-bubblan uppstod samt sprack till följd av irrationellt investeringsbeteende bland investerarna på aktiemarknaden och paniken som uppstod efteråt gjorde att volatiliteten på aktiemarknaden höll sig förhållandevis hög fram tills den lade sig kort efter maj 2002. NASDAQ Composite hade högst volatilitet till följd av IT-bubblan medan DJIA och S&P 500 hade likvärdig volatilitet.

Mastitis, an inflammation of the udder mainly caused by a bacterial infection, induces an increase in the somatic cell count (SCC) in milk and is consequently one of several factors affecting SCC in milk. In this literature review it is investigated whether SCC; on udder quarter, cow composite or bulk tank milk level, can be used as a quality marker with focus on milk composition in terms of the content of fat, lactose, total protein, casein and whey protein. According to this literature review the relation between SCC and milk composition is not reliable either on udder quarter, cow composite or bulk tank milk level. SCC was related to lactose, casein and whey protein on udder quarter level; lactose and whey protein on cow composite level and lactose on bulk tank milk level.

We understand the world around us through categorization and classification. But things are morecomplex than that, life is mixed up, flowing and unable to stick to labels. The main purpose ofcorpus is to contain, organize and control food and beverages. Corpus objects are also socialmarkers that have a tradition of being elitist; in both choice of material and in that they imply acertain way of usage. Corpus objects are heavily loaded with tradition and rituals.

The purpose of this paper was to identify the elements and the alloys that five objects found in Birka consist of and to examine whether there are any significant differences between the presumably imported and domestic objects. The material was analyzed using a scanning electron microscope (SEM) which was equipped with an energy dispersive X-ray spectrometer (EDS) in order to identify the elements that are present and the alloys that the objects are made of. Then the SEM results were compared with the results of previous analyzes that have been performed on finds from Birka in order to investigate how the objects differ in elemental composition and to find out if there are any significant differences between them. The results showed that the objects? content of the elements analyzed varies as the copper alloys the objects are made of.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

This study was made on former agricultural areas that had been planted with spruce or pine, in the county of Västerbotten. The goal of the project was to investigate suspected deficiency of boron in these areas. Several objects have been reported for possible deficiency and some of these have the characteristic symptoms of boron-deficiency. The hypotheses are that 1) Boron deficiency is present at several of the investigated objects. 2) Planting of forest on cultivated postglacial sediments leads to a successive podzolisation with a decreasing content of organic matter in the mineral soil, due to decomposition, and a decreasing pH in the soil, even on locations that have been added lime. To be able to confirm or reject the hypotheses a number of tests were performed.

This Master Thesis is a product development project that has been carried out in cooperation withSvea Teknik AB. The company has developed an apparatus for attachment of a keel to a hull base ofa boat. The purpose for this thesis has been to compare a new concept of keel attachment incomposite material to thetraditionaldesign solution. This new keel attachment minimizes thedamages that may arise on the keel and the hull of the boat in shape of stresses impacts at grounding.Today it is a problem, relating to keel attachment on sailing boats having a fin keel or a bulbous keel.The manufacture focus on developing larger draught and shorter keel blades. The overall purpose isto increase performance of the sailing boat.The task for this thesis was to develop a concept of keel blade in composite material and investigateattachment to a sheet-shaped element.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

The objective of this study was to contribute with suggestions of nature preservation managements of selected forest objects of high nature values managed by the Swedish state-owned forest company Sveaskog. Many forests with high natural potential are relatively rare today due to modern forestry, where wood production is the main purpose. Sveaskog?s policy is to consider and to priority nature conservation on valuable objects. This assessment includes objects that in the future may develop into nature reserves.

Due to the climate change natural disasters expects to increase and in some areas the conditions for dissemination of hazardous pollutants from contaminated areas could be affected. Different inventories and mapping has been made to identify areas of risk for flood or avalanche around the country. At the same time inventory and treatment of potential polluted areas (MIFO objects) is progressing. In Ljungans run of area in Västernorrlands county is a exposed area due to the amount of clay and silt in the ground that are sensitive in the context avalanche. The area has also a lot of MIFO objects and risks of flood.This essay aims to investigate what data material that is available regarding MIFO objects, flood- and avalanche risks in Ljungans run of area in Västernorrlands county.

The foundation for a museum is the collection. To collect, preserve and display is what constitutes a museum. But the process of deciding which object´s should be saved, and which objects should not, are based on values. It is also values that make people inclined to donate objects to museums. How and why we value a museum determine if and why we donate.Objects themselves could be said to have a biography just like people.

This paper investigates whether the traditional accrual based trading strategy first documented by Sloan (1996) can be refined using fundamental analysis. Specifically, this is done by implementing the composite signal F_SCORE introduced by Piotroski (2000) to identify financially strong or weak firms. We find that by applying both investment models simultaneously, in a model we call P_KOMB, the mean market-adjusted return earned by an investor exploiting the accrual anomaly can be increased by 14.8% annually. This is achieved by taking a long position in strong firms (as defined by the composite signal) in the lowest accrual portfolio, while an offsetting short position is taken in weak firms in the highest accrual portfolio, repeated annually between 1997 and 2007. Consistent with prior studies, positive market-adjusted returns can be attained through assessment of accruals as well as key value drivers found in historical financial data.